Rouge Removal & De-Rouging for Stainless Steel Systems

Reviewed by Tom Harrison, member of the ASME BPE Surface Finish Subcommittee · Updated November 2026

The short answer: Rouge is iron-oxide corrosion on stainless steel, and Harrison Electropolishing removes it. Type 1 rouge comes off with chemical de-rouging and re-passivation; Type 2 and Type 3 rouge are removed by pickling, mechanical polishing or electropolishing, then the surface is re-passivated per ASTM A967. We do this in our Houston shop for vessels, piping, valves and fittings, and on-site for installed WFI, clean-steam and process systems in the Houston area and along the Gulf Coast.

Stainless steel rouge removal services

De-rouging is a three-step job: identify the rouge type, remove it with the least aggressive method that works, and rebuild the passive layer so it does not come back. Harrison provides all three in-house.

  • Chemical de-rouging and re-passivation for Type 1 films on vessels, piping and skids — in-shop or on-site, verified by copper sulfate or ferroxyl test per ASTM A967.
  • Pickling for heavier Type 2 and Type 3 deposits, followed by passivation. See Passivation & Pickling.
  • Electropolishing to remove the oxidized layer entirely and leave a chromium-enriched, lower-Ra surface that resists re-rouging. See Stainless Steel Electropolishing.
  • Mechanical polishing where blistered Type 2 rouge has damaged the surface and a finish must be restored before electropolishing. See Mechanical Polishing.

Rouge in a vessel, WFI loop or clean-steam system? Send photos and a description of where it is forming — we'll tell you which type it is and the right way to remove it.

Send Us Your Drawing or call 800-245-5707, Mon–Fri 7–5 Central.

Related: Pharmaceutical Equipment · Passivation Services · Electropolishing vs. Passivation

What is rouging?

Rouging of stainless steel is a form of corrosion either from external sources or from destruction of the passive layer, leaving a low-chromium area. The most common contaminants are iron oxide, hydroxide or carbonate. It is most common in high-purity and high-temperature water systems: WFI loops, clean-steam generators, distillation columns, bioreactors and CIP circuits.

The three types of rouge and how each is removed

Type 1 rouge originates from an external source. It typically appears as a loosely adhering hydrated iron oxide deposit that ranges in color from orange to red-orange to magenta depending on its distance from its source. The typical source is metal particles generated by erosion or cavitation at pump surfaces; once loose, these particles oxidize in the solution and deposit on other surfaces. Type 1 rouge can be removed by wiping or, more thoroughly, by chemical de-rouging and passivation or by electropolishing.

Type 2 rouge forms as the surface below the rouge coloration oxidizes. It appears as a rust-colored deposit or blister that, when pried off, may reveal a bright silver, active stainless steel surface. This type is generally caused by chlorides and is more likely to appear on unpassivated surfaces. Type 2 rouge cannot be wiped off; it is removed by mechanical polishing, acid cleaning (pickling) or electropolishing, followed by passivation.

Type 3 rouge is black and originates in the presence of high-temperature steam. Analysis shows it is iron sesquioxide, also known as magnetite. On an electropolished surface it appears glossy black, tightly adherent and stable; on unpassivated, mechanically polished surfaces it may appear powdery black and slough off. Type 3 de-rouging is accomplished chemically and by mechanical polishing or electropolishing.

What to send for a quote

Photos of the affected surfaces, the equipment type and material (316L is typical), approximate dimensions, whether the system can be shipped or must be treated in place, and any finish requirement such as an ASME BPE SF designation. We will identify the rouge type and recommend the removal method before quoting.

Documentation

Passivation verification per ASTM A967 (copper sulfate or ferroxyl), surface finish report with Ra readings where a finish is specified, and a certificate of conformance.

Frequently asked questions

What is rouge on stainless steel?

Rouge is an iron-oxide discoloration that forms on stainless steel in high-purity water, WFI and clean-steam systems. It ranges from orange and red-orange films to black magnetite deposits and signals a damaged or depleted passive layer.

Can rouge be removed without replacing the equipment?

Yes. Type 1 rouge is removed by chemical de-rouging and re-passivation. Type 2 and Type 3 rouge usually require mechanical polishing, pickling or electropolishing to remove the oxidized layer, followed by passivation to rebuild the chromium-rich surface.

Does Harrison de-rouge on-site?

Yes. Harrison performs chemical de-rouging and re-passivation in its Houston shop and on-site for installed systems in the Houston area and along the Gulf Coast. Vessels and components can also be shipped in for electropolishing.

How do you verify the surface after de-rouging?

Passivation is verified per ASTM A967 using copper sulfate or ferroxyl testing, and surface roughness is measured with a profilometer when a finish is specified. Reports are provided per part or system.

How do you keep rouge from coming back?

Electropolishing and proper passivation leave a chromium-enriched passive layer that resists re-rouging. Controlling chlorides, steam quality and pump erosion sources in the system addresses the root causes.

Reference: J.C. Tverberg, "Rouging of Steel: Why Good Stainless Steel Turns Red," Flow Control, March 2003, pp. 18–24.

Industry standards: ASTM A967, ASTM A380, ASME BPE, ASME B46.1

Electropolishing

Harrison Electropolishing, the Leading Electropolishing, Passivation, Oxygen Cleaning & Mechanical Polishing Company World Wide.

Electropolishing is an electrochemical process by which surface material is removed by anodic dissolution. Electropolishing removes surface material, beginning with the high points within the microscopic surface texture. By removing these points, the electropolishing process will improve the surface finish of a metal such as stainless steel, nickel, and Hastelloy, leaving a smoother and more reflective surface. Common parts and components electropolished include tanks, piping, fittings, rods, discs, large parts & surfaces, and more.