Reduce Product Adhesion

Reviewed by Tom Harrison, member of the ASME BPE Surface Finish Subcommittee · Updated November 2026
The short answer: Product sticks to rough surfaces. Lowering surface roughness by electropolishing and mechanical polishing reduces the real surface area and the microscopic crevices that product keys into, lowers the coefficient of friction and makes surfaces easier to clean. Equipment runs longer between cleanings and cleans faster when it stops. The proprietary Harrison C-75 process was developed specifically for industrial equipment where product buildup limits throughput.
Why product builds up
A machined or mechanically polished surface is covered in ridges, folded metal and embedded abrasive. Powders, resins, polymers, adhesives and food products lodge in those features and build on themselves. Once a layer forms, it insulates heat-transfer surfaces, restricts flow, contaminates batches and forces shutdowns for cleaning.
What polishing changes
Mechanical polishing removes visible texture; electropolishing then dissolves the microscopic peaks and the folded layer, leaving a rounded, open profile that product releases from. The chromium-rich passive surface is also less reactive with many process materials. Results are documented in the case studies on screw conveyors and rotary valves.
Equipment Harrison has polished to reduce adhesion
Vessels and reactors, valves, pumps, screw conveyors, rotary valves, check valves, troughs, chutes, hoppers, piping and fittings, and conveyor belts for polymer, chemical, food and pharmaceutical production. Parts up to 15,000 lb are handled in the Houston shop. See Polymer and Plastics Production Equipment and Electropolishing Conveyor Belts.
Product building up on a conveyor, hopper, valve or vessel? Send photos, the material and what's sticking and we'll tell you whether C-75, electropolishing or mechanical polishing is the fix.
Send Us Your Drawing or call 800-245-5707, Mon–Fri 7–5 Central.
Related: Harrison C-75 · Electropolishing · Case Studies
Frequently asked questions
Does electropolishing make stainless steel non-stick?
It reduces adhesion substantially by lowering surface roughness and removing the microscopic crevices product keys into. It is not a coating; the improvement comes from the surface profile and chemistry of the base metal.
What is the Harrison C-75 process?
Harrison C-75 is a proprietary polishing procedure developed in 1980 for industrial equipment where product buildup limits throughput, such as screw conveyors, rotary valves and polymer processing equipment.
Can large equipment be treated?
Yes. Harrison handles parts up to 15,000 lb with four overhead cranes and four electropolishing lines, and performs passivation and pickling in the field for installed equipment.

Services
Resources
13002 Brittmoore Park Dr
Houston, TX 77041-7231
Phone: 800-245-5707
